blueMatic EAV3

Optimum convenience – Automatic

The blueMatic EAV3 is an automatic multi-point locking system with integrated motorised opening function. The automatic function is based on the mechanical autoLock AV3 and can be conveniently unlocked via motor at the push of a button.

An elegant solution – also as an upgrade

The motorised automatic locking system enables the massive hooks and sealing elements to automatically grip the keep rail when the door is pulled shut – automatic security and sealing! But the blueMatic EAV3 offers even more convenience. The locked door can be easily opened via remote control or intercom system. The hooks, sealing elements and latch can be retracted at the push of a button, granting immediate entry through the closed door. This is not only convenient, but elegant as well.

The motorised components can also be retrofitted into an existing Winkhaus autoLock AV3 automatic locking system. An additional revolving door drive is also available as an option.

A daytime latch can be integrated into the latch deadbolt keep to release the door for a certain period of time, much like an electric release with daytime service mode.

blueMatic EAV3

Example electronic accessories

blueMatic EAV3

Fingerprinter (ekey l., Idenkom r.)


  • Motorised components for contact-free unlocking are already integrated or can be retrofitted
  • Suitable for all access control systems with potential-free contact
  • Automatic locking by means of magnet technology in the frame keep
  • Easily unlocked by opening the locking and sealing elements in succession.
  • The main deadbolt / entire system can be manually blocked via profile cylinder – the “holiday lockout function”
  • High security thanks to an arrested locking bolt with 25 mm visible width and claw action (RC2/RC3 compatible)
  • Tight seal by means of two independent sealing elements
  • Sash rebate heights available up to 2400 mm
  • Compatible with other Winkhaus products thanks to consistent milling measurements (plus cut-out for magnet/trigger) and keep
  • Magnetic trigger and daytime latch can be retrofitted in standard Winkhaus keeps for hooks


  • Manual day service mode which can be activated at the push of a button (also available as a retrofit upgrade)
  • Door closer controlled using the blueMatic EAV3’s potential-free signal output
blueMatic EAV3

General representation


  • STV blueMatic EAV3, model 60 with 2 hooks for standard front doors with sash rebate heights from 1875 to 2230 mm
  • STV blueMatic EAV3, model 62 with 2 hooks for low front doors with sash rebate heights from 1735 to 1875 mm
  • STV blueMatic EAV3, model 69 with 2 hooks for high front doors with sash rebate heights from 2230 to 2400 mm



  • Power supply, 12 V DC, 2 A
  • Cable transition
  • Transponder set
  • Wireless remote control set
  • Cable sets for finger print



  • The blueMatic EAV3 motor can be ordered preassembled or as a component for retrofitting.
  • Design with integrated entry guard not available.
  • If third-party power supplies are used: 12 V DC (direct current), stabilised, min. 1.5 A (for EAV locking systems only)
  • See the instruction manual in the download area for details on wiring.
Declaration of performance in accordance with Construction Products Regulation (BauPVO)

Here you will find the current performance explanations of the relevant products

Declaration of performance